skip to Main Content
1300 861 747
Jarrett Redback Slashers

Jarrett Redback Range – Slashers

General construction

  • One Piece body sheet eliminates collection points for grass and debris
  • Unique ‘clean-top’ design makes cleaning a breeze
  • 3-degree ‘centre-to-side’ slope adds to the ease of keeping debris and water off
  • The ‘centre-to-side’ slope gives better grass flow at the entry/exit point
  • Full length shoulder gussets adds extra strength to the side of the slasher body
  • Hot –dip-galvanized body keeps your slasher in good order for many years of service

Headstock Linkage

  • All models use a strong ‘bow’ headstock and solid backstays as standard
  • An 8mm mounting plate is hidden in the body for a super strong mounting
  • You can bolt your Headstock to either central mount, left or right offset
  • The Top Link Slide of the Headstock allows the slasher to follow the ground contour
  • Solid backstays allows the slasher to be reversed into dense debris without rearing up

Body Guarding

  • Chain links are welded to a heavy duty steel bar make for simple yet super strong Chain Guards
  • The fabricated Chain Guards are bolted to the body and added strength to the leading edge
  • This chain guard system allows for simple repairs if damaged
  • Heavy Duty Reinforced Rubber panels are bolted to the rear body panel as standard


  • A large 200mm radius both front and rear helps the slasher ride over irregularities on the ground
  • Skids are reversible for longer life
  • Skids are adjustable and give the slasher four different cutting heights
  • Unique Skid adjustment plates give the skid’s cutting height a positive lock
  • Skid Adjusting Plates add extra strength and support to the already strong skids


  • Rear Chain Apron in lieu of rubber
  • Single Height control wheel
  • Dual height control wheel


RB 4-40 RB 5-40 RB 5-75 RB 6-75 RB 6-100 RB 7-100 RB 7-130
Body Plate thickness (mm) 5 5 5 6 6 6 6
Cutting width (mm) 1200 1500 1500 1800 1800 2100 2100
Gearbox hp (kw) 40 (30) 40 (30) 75 (56) 75/56 100 (75) 100 (75) 130 (97)
Drive Shaft Series S4 S4 S6 S6 S6 S6 S6
Blue’ Clutch Diameter (mm) 150 150 200 200 200 200 200
Tip Speed ft/min (m/s) 12,900 (65) 16,400 (85) 16,400 (85) 19,600 (100) 19,600 (100) 17,300 (88) 17,300 (88)


For more information about this product feel free to visit Jarrett website.

Back To Top